Pipothérapie en acier inoxydable
Obtenir le dernier prixType de paiement: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
transport: | Ocean,Land,Air |
Type de paiement: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
transport: | Ocean,Land,Air |
marque: zerru
Unités de vente | : | Set/Sets |
Après avoir travaillé pendant un certain temps, ouvrir la couverture et retirer le panier, le lavage de la brosse peut être restauré comme neuf, par conséquent, il a été largement utilisé dans les industries du pétrole, des produits chimiques, des produits pharmaceutiques, des aliments et d'autres.
概述 Description générale
1. La crépine est conçue, fabriquée et inspectée selon HG / T 21637-1991 et SHT3411-1999.
2. La norme de bride de filtre est basée sur Hg / T20592-2009. Veuillez indiquer d'autres normes de bride: comme GB, ANSI, ASME, HGJ, DIN, JIS, etc.
3. Les formes de connexion du filtre comprennent le type de bride (manche lâche), le type de soudage, le type fileté, le type d'installation rapide, etc.
4. L'élément de filtre est généralement en maille métallique en acier inoxydable. Les utilisateurs peuvent également choisir un maillage perforé, un maillage métallique en forme de coin ou un maillage fritté à cinq couches comme élément de filtre.
工作 介质 介质 application
技术 参数 Spécification
Pipeline filter | |
type | Four types: basket, Y-shaped, T-shaped, conical, and temporary |
specifications | DN15~DN1000 |
Main material | Cast iron, carbon steel, low alloy steel, austenitic stainless steel, duplex steel, titanium material, nickel alloy, lining rubber |
Filter screen | Stainless steel |
Filtering accuracy | 10-1000 mesh |
Connection specifications | DN15~DN600 (1/2 "~24") |
Work title pressure | 1.0, 1.6, 2.5, 4.0, 5.0, 6.3, 10.0MPa |
Applicable temperature range | -196 ° C~400 ° C |
Codes de spécification de type et de sélection
1. Type Type
Type Y, T-type, type de cône, Rrainage en Y de type panier, Trainer en T, Raïeur de cône, BasketsStrainer
2. Code de la méthode de marquage du modèle
① Filter type and structural type | Refer to the table below |
② Special structural types | Refer to the table below |
③ Interface end face type | 4-flange connection 5-butt welding connection 6-socket welding connection |
④ Nominal pressure (MPa) | 1.0, 1.6, 2.5, 4.0, 5.0, 6.3, 10.0MPa; 150Lb, 300Lb |
⑤ Nominal diameter (mm) | DN15~DN600 (1/2 "~24") |
⑥ Shell material | C=CS carbon steel; A=AS low alloy steel; S=SS stainless steel |
⑦ Flange sealing surface type | RF convex surface, LF concave surface, LM convex surface, RJ ring groove surface, FF full plane, TG tenon groove surface |
过滤器 类型 与 结构型式 Type de filtre et stturcture
代号Code |
结构型式代号 Structural type code |
特殊结构型式代号Speiclal Structural type |
Y型过滤器 Y-strainer ZRY |
Ⅰ—同径铸造Y型cast Y-type |
|
Ⅱ—焊接Y型 welded Y-type |
L—加长型 L-Extended |
|
J—夹套伴热型 J-jacket heating |
||
T型过滤器T-strainer ZRT |
Ⅰ—正折流T型 Tee Angled Flow Type |
L—加长型 L-Extended |
Ⅱ—反折流T型 |
L—加长型 L-Extended |
|
Ⅲ—直流式T型 Tee Straight Flow Type |
|
|
锥型过滤器 Cone-Strainer ZRZ |
Ⅰ—尖顶锥形型 Pointed cone |
|
Ⅱ—平顶锥形型 Flat topped cone |
|
|
篮式过滤器Basket-strainer ZRB |
Ⅰ—直通平底篮式 Straight flat bottom basket type |
J—夹套伴热型 J-jacket heating |
K—篮筐型 basket type |
||
Ⅱ—直通封头篮式Straight Flow Basket Strainer with fomredhead |
P—盘管伴热型 coil heating |
|
Ⅲ—高低接管平板篮式High and low flat-bottomed basket |
K—篮筐型 basket |
|
Ⅳ—高低接管封头篮式High and low Basket Strainer with fomred |
head |
|
Ⅴ—高低接管重叠式篮式 |
|
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.